
ALFRA Busbar bending and punching machine
For Busbars 120 x 12 mm • Made in Germany by ALFRA
Prod.-No. 03200 with accessories
Freely programmable digital
measuring system for the
bending angle up to above 90°
Applicable for the machines
Prod.-No. 03200 and 03980
R10
Prod.-No. 03229
Prod.-No. 03852
Prod.-No. 03853
Prod.-No. 03201
Prod.-No. 03228 Prod.-No. 03202
Prod.-No.
Basic machine with safety protective cover and control cable 03200
Electric angle reader R10 with connection cable 03201
Bending die R10 03202
Length stop with fine adjustment 03203
Bending die with movable jaws (120 x 10 mm Cu) 03228
Digital measuring system of the bending angle 03229
Upper floor bending tool 03246
with 2 pairs of pressure plates for 5 - and 10 mm steps
(max. range: 100 x 5 mm/60 x 10 mm Cu)
Electrohydraulic pump SC-05 III B
Technical Data:
Motor voltage: 230 V / 50 Hz
(110V / 50 or 60Hz on request)
Motor capacity: 1.1 kW
Max. operating pressure: 700 bar
Presetting: 620 bar
Flow rate: 0.9 l/min.
Tank volume: 5.0 l
Weight approx: 29 kg
Dimension L x W x H: 500 x 230 x 370 mm
Prod.-No.
Electrohydraulic pump SC-05 III B 03852
with 2.0 m high-pressure hose + quick connector
Optional available:
Foot switch for start function, 1 pedal 03861
Foot switch for start-stop-off function, 3 pedals 03865
Electrohydraulic pump AHP 03-1
Technical Data:
Motor voltage: 230V / 50Hz
(110V / 50 or 60Hz on request)
Motor capacity: 0.55 kW
Max. operating pressure: 700 bar
Flow rate: 0.62 l/min. at 60Hz
0.52 l/min. at 50Hz
Tank volume: 2.5 l
Temperature switch: 80°C +/- 5°
Weight: 17 kg
Dimension L x W x H: 330 x 180 x 350 mm
Prod.-No.
Electro hydraulic pump AHP 03-01 complete, with handswitch,
03853
With 2.0 meter hydraulic hose + quick connector
Optional available:
Foot switch with 2-pedals; start-off function 03866
A/45
Comentários a estes Manuais